Thursday, March 19, 2015

Food Warmers and Chafing Sets

Krischer Giftwear made several different food warmers in the years they were in business. The first one that I found was  a tall, 8"wide   with the flower and ribbon  supports. It had a 1 1/2 quart glass bowl and was not stamped, The lid had a pie edge ruffle. It was a real prize




 
The real prize came later when I found the same piece complete in the box with the tag. Rodney Kent #475 Foodwarmer complete with lable and glass liner.


 
 
 
 
 
 


Then there is the chafing dish set. I have seen these sets and their pieces being auctioned on ebay all the time. But this is the full set. It comes with a stand with for gel fuel and a snuffer to put the flame out. there is a holder with an indentation that sits in the ring, this holder has no handles and the frying pan sits easily inside the holder. I believe that the holder was meant to hold steaming water. The lid has a pie edge. This set also came with  bowl and an additional lid.
 
 
notice how flat the ring is that holds the bowl and frying pan
 
 
The frying pan(omlet pan?) fits nicely into the holder.
 

 
 
 
 
 
notice the rubber feet on the underside of the stand,
 
 
 
 
A recent surprise was this food warmer below.  Rodney Kent # 495. This is a much smaller glass liner and stand. I'm sure that this originally came with a candle much like #475, but I don't own it.

 
 
 
 
 
compare the size of the #495 on the right with the 475 on the left.
 
 
This is the sticker inside the original bowl, which never made it through shipment. It is from Federal Glass Co. and their mixing bowls are easily found on EBay. This one takes the 7" size. They come 5"-8"

Another food warmer with a divided Pyrex bowl. This too took gel fuel and had a snuffer. This was a new type of lid, one that fit inside the bowl and the bowl had no handles




 

 

This is the matching casserole server.
 
Finally, the #475 holder with a pyrex liner especially made for Russakov Department store
 







 So much for food warmers......... I'm sure I haven't covered all of them. After all I only discovered #495 this past summer.
 My feeling is if Continental  Silverlook Co. offered a type of bowl, so must have Rodney Kent.  I expect one day to see a coffee pot, A reader, Donna Whitely, sent me photographs of a Serving platter with a tree well. Recently I saw one from Continental.Below are Donna's photos

 

No doubt they are Rodney Kent. You never know what I'll come across next to share with you.
 Next time we'll do kitchen utility sets.



Wednesday, January 7, 2015

Lastest finds I didn't know I was looking for

The last few weeks have been very fruitful.

First I came across this small food warmer, number 495 from my previous blog. Then I found two samples of the large cruet version of the RK418, 3pc. Cruet Set that I knew existed from the catalog page that I have.


 
and now this....
 


I found one of these on Etsey, but there is also one currently on EBay if you search vintage metal and glass cruet. It is nice to know that the one I have has cruets from Helen Atlas, as the one with the cruets only was a marriage that I did based on the  catalog page. And the cruets with the H and the A inside matched the measurements on the catalog page.


One that I lost previously has now been found with all it's parts... maybe. If you check out the catalog page, the condiment bowls have a different lid. Since I have no documentation to search, I don't know if this is yet a third iteration or that this, too, is a marriage by someone... although I am closer to an example of  RK410, the Revolving Hostess Susan than I was previously. This came with the original spoons as well. All of these examples are from 1955.

 
One more is still coming in the mail.....soon. Stay tuned.

Monday, December 29, 2014

New Finds and Disappointments

A cautionary tale .....

While checking out EBay recently I came across an item that I had never seen in Rodney Kent. It was a food warmer. It looked very much like many of the food warmers that I had seen before but it had a box and this strange white bowl. It was obviously never used. It still had the original packing and the number  stamped on the box. It was like a smaller version of #475.

Introducing 495 Food Warmer.
 
 
So I was really excited when I won this item. It arrived today........
 
The bowl was smashed. This is not uncommon. First, when shipping an items with a glassware item that has been in a box, maybe sitting in an unheated garage for 50 years... or maybe even 75 years, it may become brittle. You cannot pack it nested with the original base and lid. Each part must be significantly  protected with bubble wrap or several layers of newspaper and then  individually packed in a STURDY box. When the original box is available, it is a part of the collector package and it is not meant to be the packing box. It should sit inside another box. In this case the items were sipped in the original box with no additional packing other than what you see here. It's amazing that the other pieces weren't damaged also.
 
Fortunately, not only did I have access to the original  photos to see what the bowl looked like, the crushed bowl had the original stamp inside, assuring me that it was indeed the original bowl for the set and I now had the makers mark
 
The bowl shape is very distinctive.
 


This was the tag on the inside of the bowl.  Federal Glassware with the shield  and it says Heat Proof. Pressed into the glass on the other side is the logo with the "F". It didn't take me long on eBay to find the bowl. I opted for a nested set of four, because I figured one of the sizes would be correct. I was really happy when I found that the 8" diameter bowl was the perfect fit. And I have the nested set for other things.



 

Above the box before it was sent to me. Below, a little worse for wear, but it did survive

A little comparison below of #475, the 2 quart food Warmer and the new one on the right. It is considerably smaller. I was quite surprised. I am also going to rethink the FoodWarmer/Chafing dish I have with the decorative bowl that is pressed with "Manufactured Exclusively for Rossakov Co. Chicago." I always thought of this as a marriage, but maybe it's just department store special. Ah! Every piece invites more questions.



Next blog will be posted in less time than this one took. I have several more items to review. It's been a busy fall for me, not only with Eastern Star, but also with Rodney Kent. Stay tuned for  a review of several  breakfast sets. Maybe one on tidbit trays, too. Or the No Stamp chip'n'dip tray. Or maybe the Food warmer or chafing dish sets.....When you have 175 pieces, there's a lot to select from.

Next time, folks.









Tuesday, September 16, 2014

Enigma Resolved

If you read my Enigma blog last week, then you know that I was on to something. Yes, I won the bid on Ebay and I am now the proud owner of a tray, #716. Given in 1956 as a wedding present to the sellers mother and never used. Still in the original box, which is the only reason we have a number because there is no stamp, it is on its way to my collection. Here is a sneak preview from the seller's post
 
The tray, a polished steel with a rope edge, it is the floral stamp in the center that is identical to my recent find of a casserole holder with a brass colored tulip final and brass handles.
 

 

 
Above, the box that it was shipped in.
 
 
 
Another view of the central stamp. Compare that to the stamp on the casserole lid.
 
 
 
 
On the down side, I lost a bid for something I had wanted. A butter dish with the lid that matched the catalog page I had from 1955. Below is a picture that some lucky collector acquired while I couldn't make a connection to the web from inside my place of employment. I so need an emoji right now.....
 
 
Well here is what I was outbid on.
 

 
Check out my earlier blog of the catalog page and you will see this breakfast susan. I own #400, with the traditional finial on the butter dish. I don't know if this carries the same number.
 

 
 

Thursday, September 4, 2014

Rodney Kent ... NAKED

All these no stamp items are missing the tulip bouquet on the front. They do have a stamp on the back. It is the KnightHead stamp and the number is distinctly stamped. This is a late 50's or 60's era  item. The Stamp was the last logo used in the line. All the pieces are very heavy metal. All have thick picot edges. None have tulip stamps or handles. Many have a  soup bowl rim.
 
My latest finds in the no stamp category.
 
Number 401 No Stamp
 


402 No Stamp

 

 
 

 
406 No stamp




407 No Stamp

 
 

 
Number 408 No Stamp

 
 

 

 Number 409 No Stamp
 



 
Number 506
This has the weight and size of 406 NoStamp but a new stamp is introduced. It is the Sunflower Motif. I have only seen 1 other piece floating out there. I'm pretty sure there is a full set that goes to at least 509.
 
 
 
 




As the holes for identification  fill up, new ones open. Stay tuned. I just bought a chip dip plate from the No Stamp collection which should arrive any day. If you act fast, #401 is on eBay NOW. Happy hunting.
 
I don't own this one, but this is 503 with the sunflower stamp.
The NO STAMP collection
 
 
 
400
 
 
401
12 3/4" Round bowl, soupbowl rim
KNIGHT
402
12 3/4"  round bowl, soupbowl rim
KNIGHT
403
 
 
404
 
 
405
oval bread tray
KNIGHT
406
 
 
407
rectangle bread tray
KNIGHT
408
16" square  tray with  1" rim
KNIGHT
409
16" Diameter Salad bowl with rim 
KNIGHT 
410
 
 
411
 
 
412
 16 X12 Rectangle tray with 1" rim
KNIGHT
462
charger plates with rim
KNIGHT
463
 
 
464
Chip and dip plate
KNIGHT
 
 
 

 
 
This isn't an advertisement but this is what I have found that brings back the polish and shine of Rodney Kent. It is the only thing that consistently works and it may be because the aluminum in Rodney Kent, as maybe with other pieces too, is not pure aluminum but aluminum and magnesium. Used for Mag Wheels and easily fount in the auto department of many stores, it is what I polish my pieces with. I never polish the backs. that way the age shows.
 



Wednesday, September 3, 2014

Rodney Kent Enigmas

While I haven't written much this summer, it hasn't stopped me from acquiring new Rodney Kent that I've never seen. Now it is possible that like one of my previous blogs, some finds could be copies. SO I have been ever more diligent in examining them before I made a pronouncement.






Exhibit A
 
I picked this up on EBay recently. It came complete with the tag. The person who sold it told me that the tag was on at the estate sale she purchased this from. She has owned it for 12 years. The tag is stamped so that if I am to use it as a marker, it would be pre-1943. Almost nothing on it matches design-wise. I have never seen that decorative  stamping. I have never seen Brass  or gold colored trimmings. It definitely is not hammered aluminum. Yet, the tulip finial is exactly Rodney Kent. The petal detail is all there. I don't know what to think. Anyone have an opinion?


HOT UPDATE!!!
 This may indeed be the real thing with a production date of around 1956 and a number in the 700 series. More on this in a few days